Production time - 2-4 weeks


The attachment is suitable for projection of widescreen video.

Made in a metal case with combined optics - glass and polymer. The compression ratio is within 1.3x.

The lenses are not multi-coated, they have a neutral coating.

The diameter of the front Vormascope 1.3x filter is 82 mm.

These adapters are more suitable for a projector, not for video shooting.

The adapter changes the aspect ratio to 1.3x. That is, from an old 4: 3 office projector, you can pull the standard aspect ratio down to almost 16: 9. If you have a 16: 9 projector, pull up the image to a film standard of nearly 2.35: 1. If you turn the nozzle 90 degrees on a 16: 9 projector, the image will shrink to 4: 3 and you can watch old movies.

Anamorphic adapter works with many projectors.

Vignetting can occur at slightly wide corners with a closely spaced screen on the large sensor of the projector. If the front filter of the projector lens rotates, the installation of the anamorphic adapter should be performed on the bar next to the lens. The anamorphic adapter must not rotate during projection, otherwise the horizontal compression ratio will change.

It is necessary to use a very clear and sharp projector lens - the anamorphic adapter significantly reduces the depth of field (makes focusing difficult), slightly blurs the image, blurred at the edges.

This adapter has a 67mm mount. Adapter rings can be used to mount to the projector.

If the diameter of the front lens of the projector is more than 72 mm, the adapter may not fit (you must measure the diameter of the front lens, not mounting).


The attachment does not have a clamping ring included.



Attention!!! Upon receipt of the goods, be sure to check the integrity of the packaging and the absence of damage to the goods. If there is damage, do not pick up the goods from the postal operator, write the reason for the refusal. This is the carrier responsible for the delivery of the goods !!!!



Vormascope 1.3x anamorphic projector adapter

RUB 8500.00Price